HOLD DOWN CLAMP: 300 X 300MM 45 DEG

* Diimensional assembly worktable D28 series, on the high precision table, every 50mm/100mm interval distributes the D28mm circular hole * These holes can be used for holding down workpiece for utmost accuracy * Working plate made of hardened die steel, specially treated with plasma nitriding on surface previnting rust ans scratching, hardness HV≥ 550 Table accuracy: flatness ≤ 0.1mm/㎡, verticality ≤ 0.1mm BENEFITS OF STEEL: * Hardness increase, smoother surface. cleaner etching lines. Note: Spatter resistance is achievable with nitriding treatment. * Hardness: Differs per treatments: Standard and Burnishing ~250HV. Nitriding ~550HV. * Dessity: 7.80 g/cm³. * Tensile Strength: 355 MPa.

* TJJ series 45 °pipe fixture can precisely clamp the welding parts with inclined angle and can be changed up and down * * The adjustable range of horizontal bar is 55-145 mm * * A regulation ring is added to the vertical tube, which can help the adjustment better. number a b c maximum load stock *