- Show All
- AUTO RECONDITIONING MACHINES
- AXLE STANDS
- BATTERY CHARGERS
- ENGINE STANDS
- GREASE & OILS
- HYDRAULIC BODY JACKS
- HYDRAULIC BOTTLE JACKS
- HYDRAULIC TOE JACKS
- HYDRAULIC TROLLEY JACKS
- HYD ENGINE CRANES
- HYD MOTORCYCLE LIFT
- HYD TRANSMISSION JACKS
- HYD SPRING COMPRESSOR
- HYD VEHICLE POSITIONING JACK
- GARAGE ESSENTIALS
- OIL DRAIN TANK
- PANEL BEATING EQUIPMENT
- WORKSHOP PRESSES
WELDING TABLE: 3D 1200 X 1200 X 200MM CT28 NITRIDE
$4,800.00
* Diimensional assembly worktable D28 series, on the high precision table, every
50mm/100mm interval distributes the D28mm circular hole
* These holes can be used for holding down workpiece for utmost accuracy
* Working plate made of hardened die steel, specially treated with plasma nitriding on surface previnting rust and scratching, hardness HV≥ 550
Table accuracy: flatness ≤ 0.1mm/㎡, verticality ≤ 0.1mm
BENEFITS OF STEEL:
* Hardness increase, smoother surface. cleaner etching lines.
Note: Spatter resistance is achievable with nitriding treatment.
* Hardness: Differs per treatments:
Standard and Burnishing ~250HV. Nitriding ~550HV.
* Dessity: 7.80 g/cm³.
* Tensile Strength: 355 MPa.
| Weight | 3134 kg |
|---|---|
| Dimensions | 2.1 × 1.1 × 0.3 cm |
In stock
Description
| DESCRIPTION | Welding Table 3D |
|---|---|
| MEASUREMENTS (A) | 1200mm |
| MEASUREMENTS (B) | 1200mm |
| MEASUREMENTS (C) | 200mm |
| LEG HEIGHT | 670mm |
| TABLE THICKNESS | 25.0mm |
| SURFACE FINISH | Plasma Nitriding |
| SURFACE HARDNESS | HV>500 Core HRC28-35 |
| MATERIAL | Pre-hardened Die Steel |
| HOLE DIAMETER | D28.0mm |
| WEIGHT NETT/GROSS | 3.134kg |
| VOLUME | 0.6930cm |
Shipping & Delivery
Related products
WELDING TABLE: 3D 1500 X 1500 X 200MM 28.0MM 4 LEGS
SKU:
WLT20001104
WELDING TABLE: 3D 2000 X 1200 X 200MM 28.0MM
SKU:
WLT20001105
WELDING TABLE: 3D 2400 X 1200 X 200MM 28.0MM 6 LEGS
SKU:
WLT20001106
WELDING TABLE: 3D 4000 X 2000 X 200MM CT
SKU:
WLT20001160
* Diimensional assembly worktable D28 series, on the high precision table, every
50mm/100mm interval distributes the D28mm circular hole
* These holes can be used for holding down workpiece for utmost accuracy
* Working plate made of hardened die steel, specially treated with plasma nitriding on surface previnting rust ans scratching, hardness HV≥ 550
Table accuracy: flatness ≤ 0.1mm/㎡, verticality ≤ 0.1mm
BENEFITS OF STEEL:
* Hardness increase, smoother surface. cleaner etching lines.
Note: Spatter resistance is achievable with nitriding treatment.
* Hardness: Differs per treatments:
Standard and Burnishing ~250HV. Nitriding ~550HV.
* Dessity: 7.80 g/cm³.
* Tensile Strength: 355 MPa.
WELDING TABLE: 2D 2000 X 1000 X 100MM CT
SKU:
WLT20001174
* Diimensional assembly worktable D28 series, on the high precision table, every
50mm/100mm interval distributes the D28mm circular hole
* These holes can be used for holding down workpiece for utmost accuracy
* Working plate made of hardened die steel, specially treated with plasma nitriding on surface previnting rust ans scratching, hardness HV≥ 550
Table accuracy: flatness ≤ 0.1mm/㎡, verticality ≤ 0.1mm
BENEFITS OF STEEL:
* Hardness increase, smoother surface. cleaner etching lines.
Note: Spatter resistance is achievable with nitriding treatment.
* Hardness: Differs per treatments:
Standard and Burnishing ~250HV. Nitriding ~550HV.
* Dessity: 7.80 g/cm³.
* Tensile Strength: 355 MPa.
TRANSPORT LIFTING RINGS
SKU:
WLT20001200
* TJ series 90 ° pipe clamp, make accurate powerful clamping 180 ° possible
* Horizontal bar can adjust the range of 40-180mm, the vertical bar has different
length specifications, and the adjustment range is also different
* The vertical tube increases the adjusting ring, which can help the adjustment better *
HOLD DOWN CLAMP: 300 X 300MM 90 DEG
SKU:
WLT20001238
HOLD DOWN CLAMP: 150 X 300MM 180 DEG
SKU:
WLT20001241