- Show All
- AUTO RECONDITIONING MACHINES
- AXLE STANDS
- BATTERY CHARGERS
- ENGINE STANDS
- GREASE & OILS
- HYDRAULIC BODY JACKS
- HYDRAULIC BOTTLE JACKS
- HYDRAULIC TOE JACKS
- HYDRAULIC TROLLEY JACKS
- HYD ENGINE CRANES
- HYD MOTORCYCLE LIFT
- HYD TRANSMISSION JACKS
- HYD SPRING COMPRESSOR
- HYD VEHICLE POSITIONING JACK
- GARAGE ESSENTIALS
- OIL DRAIN TANK
- PANEL BEATING EQUIPMENT
- WORKSHOP PRESSES
PERMANET MARKER PEN: CRC SILVER
Excl. GST: $7.90
Incl. GST: $9.09
Incl. GST: $9.09
PERMANET MARKER PEN: LEADERART BLACK
Excl. GST: $7.90
Incl. GST: $9.09
Incl. GST: $9.09
PLANER: TANNER WT-610 610MM 10HP 3PH SPIRAL C/HEAD
Excl. GST: $12,000.00
Incl. GST: $13,800.00
* TANNER WT-610 Planer with 610mm planing width
* Industrial quality machine
* Fitted with spiral cutter head
* 3pcs motor-driven upper feed rollers
* Rubber-coated outfeed rollers to endure a perfect feeding in any conditions
* Partial view of cutterblock and feed system
* Powerful 5.5hp main motor (10hp is optional)
* Cutterblock with antikick-back guards
| Weight | 720 kg |
|---|---|
| Dimensions | 1.02 × 0.75 × 1.26 cm |
Description
| CUTTING WIDTH | 610mm |
|---|---|
| CUTTING HEIGHT | 178mm |
| MIN LENGTH | 280mm |
| MIN THICKNESS | 3.0mm |
| FEED SPEEDS | 1 |
| FEED RATE | 8M/Min |
| CUTTERHEAD SPEED | 5300mm |
| CUTTER HEAD | 90.0mm |
| CUTTERHEAD | Spiral Head 15 x 15 x 2.5mm |
| TCT TIPS | |
| MOTOR | 5.5kw 3Phase |
| WEIGHT NETT/GROSS | 695/ 720kg |
| VOLUME | 0.9639cm |
| PACKING SIZE L X W X H | 1100 x 860 x 1350mm |
Shipping & Delivery
Related products
PLANER: 12″ MB103 1PH
SKU:
TKN112120
* This machine comes with a powerful 3hp single phase motor
* Equiped will Four knife cutterhead
* Serrated infeed rollers
* The machine is equiped with anti-kickback fingers for operator safety
* Large extension infeed and outfeed table are fitted allowing for maximum workpiece support
* Oil bath gearbox for feed speed change
* Fully enclosed carbinet stand
* Overhead rollers for passing workpiece over when re-machining
PLANER: TANNER 12″ 1.5KW 1PH
SKU:
TKN112122
PLANER: MB-104 16″ 4HP 1PH
SKU:
TKN112600
* This machine comes with a powerful 4hp single phase motor
* Equiped will Four knife cutterhead
* Serrated infeed rollers
* The machine is equiped with anti-kickback fingers for operator safety
* Large extension infeed and outfeed table are fitted allowing for maximum workpiece support
* Oil bath gearbox for feed speed change
* Fully enclosed carbinet stand
* Overhead rollers for passing workpiece over when re-machining
PLANER: TANNER 16″ TP-104H 4KW 3PH SPIRAL HEAD
SKU:
TKN112614
* This Tanner TP-104H 16" Planer comes with a 4.0kw motor
* Equiped wilh a spiral cutterhead
* Serrated steel infeed rollers
* The machine is equiped with anti-kickback fingers for operator safety
* Large extension infeed and outfeed table are fitted allowing for maximum workpiece support
* Oil bath gearbox for feed speed change
* Fully enclosed carbnet stand
* Heavy duty machine
PLANER: TANNER 16″ 2.2KW 1PH MOTOR UNDER
SKU:
TKN112618
* This Tanner TP-1040F 16" Planer comes with a 2.2kw motor
* Equiped wilh 3 blade cutter head
* Serrated steel infeed rollers
* The machine is equiped with anti-kickback fingers for operator safety
* Large extension infeed and outfeed table are fitted allowing for maximum workpiece support
* Fully enclosed carbnet stand
PLANER: TANNER CT-508 20″ 5HP 3PH
SKU:
TKN114234
* The TANNER TPC-508 offers a cutting capacity up to 20 wide and a depth of 6.0mm
* Solid cast construction make this machine very rigid
* Four heavy columns suport the cutterhead
* Oil bath lubricating gearbox provides very smooth feeding
* Cutterhead is dynamically balanced to provide smooth running and a good finish
* Both infeed and outfeed tables are heavy cast to provide support to the workpiece
* Two rollers are built on top of the machine offering convenient material handling
* This model has a 5hp three phase motor
* A proven perfomer over many years of development
PLANER: TANNER FOUR SIDER 230MM 10HP
SKU:
TKN115000
* TANNER MS-423 4 side Planer
* Industrial quality machine with table surface of high ductile cast iron
* Cutterhead guard is manufactured from HSS, heat treated and hard chromed
* Numerical control panel allows sizing adjustment of cutters for convenience and rapit settings
* Fitted with overload protection - cutter will stop within 3 seconds !
* Feeding roller is combined with pneumatic and gearbox feed system
* Feeding can be opperated in jog mode for accurate settings
* The table surface adops a newly designed pneumatic lubrication for feeding all types of timber
PLANER: TANNER FOUR SIDER 300MM 7.5HP
SKU:
TKN115020
* TANNER M-412 side Planer
* Industrial quality machine with table surface of high ductile cast iron
* Cutterhead guard is manufactured from HSS, heat treated
* Numerical control panel allows sizing adjustment of cutters for convenience and rapit settings
* Fitted with overload protection
* Feeding can be opperated in jog mode for accurate settings
Three phase motor drive.
Powerful motor drive for each spindle.
Digital position control for accurate and easy setting.
7,000 rpm high spindle speed.
Compact construction. Maximum stability.
Variable feed speed.
See-thru top guard.