- Show All
- AUTO RECONDITIONING MACHINES
- AXLE STANDS
- BATTERY CHARGERS
- ENGINE STANDS
- GREASE & OILS
- HYDRAULIC BODY JACKS
- HYDRAULIC BOTTLE JACKS
- HYDRAULIC TOE JACKS
- HYDRAULIC TROLLEY JACKS
- HYD ENGINE CRANES
- HYD MOTORCYCLE LIFT
- HYD TRANSMISSION JACKS
- HYD SPRING COMPRESSOR
- HYD VEHICLE POSITIONING JACK
- GARAGE ESSENTIALS
- OIL DRAIN TANK
- PANEL BEATING EQUIPMENT
- WORKSHOP PRESSES
AL-500P: BRUSHES
Excl. GST: $35.00
Incl. GST: $40.25
Incl. GST: $40.25
CT-381: #25 SPROKET PLANER
Excl. GST: $57.00
Incl. GST: $65.55
Incl. GST: $65.55
LATHE: L-6256 560 X 2000 X 80MM BORE
Excl. GST: $19,000.00
Incl. GST: $21,850.00
* Heavy duty industrial quality lathe.
* Suitable for toolroom or general jobbing work.
* Fully enclosed oil bath gear box.
* No changing of gears required to cut metric or imperial threads.
| Weight | 3110 kg |
|---|
Description
| Swing Over Bed (mm) | 560 |
|---|---|
| Swing Over X-slide (mm) | 350 |
| Swing Over Gap (mm) | 788 |
| Between Centres (mm) | 2,000 |
| Bed Width (mm) | 350 |
| Spindle Nose | D1-8 |
| Speeds (no.) | 12 |
| Speed Range (rpm) | 25 – 1,600 |
| Spindle Bore (mm) | 80 |
| Spindle Taper | MT7 |
| Metric Threading (M) | 0.2 – 14 |
| Imperial Threading (tpi) | 2 – 112 |
| Tailstock Taper | MT5 |
| Tool Height (mm) | 20 |
| Motor (kW) | 7.5 |
| Voltage (V) | 415 |
| Weight Nett / Gross (kg) | 2,990 / 3,110 |
| Volume (m³) | 8.16 |
| Packing Size L x W x H (mm) |
Shipping & Delivery
Related products
LATHE: GOSAN 1430 356 X 750MM TURNPOWER 1PHASE
SKU:
L--109141
* Gosan has been building lathes for over 35 years.
* Heavy duty geared head lathe.
* Hardened and ground gears.
* Hardened and ground bed-way.
* Open type chip tray can be pulled out easily to remove chip.
* Foot brake giving rapid braking.
* Emergency stop button equipped on the front of headstock.
* Jog button for easy gear engagement and inching spindle.
* Extra safety switch shuts down machine entirely for changing belt or gear for threading cutting.
LATHE: GL-1640 410 X 1000MM 80MM BORE, 3 PHASE
SKU:
L--110318
* Large 80mm spindle bore makes this a very desirable machine for any workshop.
* Bed is hardened and ground offering a long, wear resistant lifespan.
* All headstock gears are hardened and ground.
* No changing of gears required to cut metric or imperial threads.
* Auto stop mechanisim for longditudinal travel, which can be set to the desired length.
* Full cast bed make this machine very rigid.
LATHE: GL-1440K 360 X 1000MM 40.0MM BORE 1PH
SKU:
L--120002
* One piece casting base make this lathe very sturdy under all turning conditions.
* Hardened precision ground gears in headstock.
* Induction hardened precision ground V way bedways.
* D1-4 spindle supported by high quality tapered roller bearings.
* Large 40mm spindle bore for bar work.
* Fitted with quickchange toolpost and digital readout.
LATHE: GL-6236K 360 x 1000 X 51MM BORE 1 PHASE
SKU:
L--120005
* Hardened precision ground gears in headstock.
* Induction hardened precision ground V way bedways.
* D1-5 spindle supported by high quality tapered roller bearings.
* Large 51mm spindle bore for bar work.
* Gap bed for larger diameter work pieces.
* Independent leadscrew & feed rod.
* Automatic feed & threading.
* Fitted with digital readout, quickchange toolpost.
LATHE: 420 X 1000 X 52MM BORE, 3 PHASE
SKU:
L--120006
* This D420 lathe comes with hardened and ground bedways.
* Hardened and ground gears in the headstock to offer a long service life.
* Precision headstock taper rolling bearings on the spindle.
* Integrated cast iron floor stand.
* Three points support for spindle.
* Two speed motor.
* Digital readout and quickchange toolpost.
LATHE: GL-6240F 400 X 1000 X 51MM BORE, 3 PHASE
SKU:
L--120010
* This GL-6240F lathe comes with hardened and ground bedways.
* Headstock gears are hardened and ground to offer a long service life.
* Precision headstock taper rolling bearings on the spindle.
* Integrated cast iron floor stand.
* Three points support for spindle.
* 16 Speed changes 45-1800rpm
* Very rigid machine
* Emergency stop buttons on both sides of the machine for added safety !
LATHE: L22 GM6256 560 X 2000 X 103MM BORE
SKU:
L--120033
* Precision ground & supersonic frequency hardened bedways, with double wall structure for super rigidity.
* Highly accurate & rigid spindle system.
* Large 103mm spindle bore.
* Optimized design of the main drive, with hardened & ground headstock gears.
* Fitted with 2 axis digital readout, taper turning attachment.
* Over 200 thread cutting options available, in metric, whitworth, module & DP, with no gear changing required.
* Adjustable auto stop mechanism for longitudinal travel.
* Gap bed for larger diameter work pieces.
LATHE: TPG1340 330 X 1000 X 38MM BORE 2HP 1 PHASE
SKU:
USD100383