- Show All
- AUTO RECONDITIONING MACHINES
- AXLE STANDS
- BATTERY CHARGERS
- ENGINE STANDS
- GREASE & OILS
- HYDRAULIC BODY JACKS
- HYDRAULIC BOTTLE JACKS
- HYDRAULIC TOE JACKS
- HYDRAULIC TROLLEY JACKS
- HYD ENGINE CRANES
- HYD MOTORCYCLE LIFT
- HYD TRANSMISSION JACKS
- HYD SPRING COMPRESSOR
- HYD VEHICLE POSITIONING JACK
- GARAGE ESSENTIALS
- OIL DRAIN TANK
- PANEL BEATING EQUIPMENT
- WORKSHOP PRESSES
ROTARY TABLE: HV 16 16" VERTEX
Excl. GST: $1,500.00
Incl. GST: $1,725.00
Incl. GST: $1,725.00
DRUM SANDER: 460MM 1.5KW 1 PHASE OPEN SIDE
Excl. GST: $2,960.00
Incl. GST: $3,404.00
Incl. GST: $3,404.00
DRUM SANDER: WDS-630C 25″
Excl. GST: $6,450.00
Incl. GST: $7,417.50
*The variable speed rubberised feed belt ptotects the underside of panels during feed
* Drums can be configured with coarse paper on the front and fine paper on the rear to allow you to produce a finshed board in one pass
* This economical sander provides 630mm boad width
* Fitted with high quality belt for long service life
* Drums are dynamically balanced to ensure smooth running
* This two drum configeration offer high efficient sanding performance
* Simple conveyer belt tracking adjustment
* Dust hood has two 4″ dust outlets
| Weight | 210 kg |
|---|---|
| Dimensions | 1.145 × 0.71 × 1.26 cm |
Description
| MAX WIDTH | 635mm |
|---|---|
| MAX THICKNESS | 125mm |
| MIN THICKNESS | 6mm |
| TYPE | Drum Sander |
| DRUM DIAMETER | 125mm |
| SANDING SPEED | 1600rpm |
| CONVEYER BELT SPEED | 3 – 20f/pm (Variable Speed) |
| FEED DRIVE MOTOR | 1/8hp (DC) |
| MAIN MOTOR | 3hp 1ph |
| WEIGHT NETT/GROSS | 180/210kg |
| VOLUME | 0.0243cm |
| PACKING SIZE L X W X H | 1145 x 710 x 1320mm |
Shipping & Delivery
Related products
DRUM SANDER: WBS-450 127 X 457MM W/STAND
SKU:
WBS300020
DRUM SANDER: 460MM 1.5KW 1 PHASE OPEN SIDE
SKU:
WBS300040
DRUM SANDER: MS-3140A 16″ X 3″ OPEN SIDE
SKU:
WBS300070
* Compact single phase drum sander
* Variable speed feed table
* Bench mounted or stand is available
* Sandpaper is easily changed with standard 75mm wide sandpaper which is wound around the drum and fastened by clips at each end of tunhe drum
* Ideal for small workshop
* Maximum sanding width is 400mm.
REDUCTION MOTOR: #114/M02712111A
SKU:
WBS300071
DRUM SANDER: 20 3HP DOUBLE DRUM
SKU:
WBS300080
* This double drum sander is ideal for high volume work * Dynamically balanced sanding drums to ensure smooth running * Height adjustment by each drum can be fitted with a different grades of sandpaper to get the desired finish * Large handwheel * Sandpaper is easy to change with no belts required * Using standard 150mm wide sandpaper rolls can be cut to suit this machine thus saving the expence of ordering special belts * Seperate feed motor for timber *
DRUM SANDER: MS-25 3HP 1PH D/DRUM
SKU:
WBS300094
* Economical drum sander with 25 sanding capacity * Variable speed feed motor with feed speeds of 3.8 - 38F/pm * Dynamically balanced sanding drums to ensure smooth running * Comes with 4 dust outlet for extraction * Fitted with 5 diameter sanding drums * Simple to change sandpaper by using standard rolls and cut to suit *
DRUM SANDER: MS-25 3HP 3PH D/DRUM
SKU:
WBS300096
* Economical drum sander with 25 sanding capacity * Variable speed feed motor with feed speeds of 3.8 - 38F/pm * Dynamically balanced sanding drums to ensure smooth running * Comes with 4 dust outlet for extraction * Fitted with 5 diameter sanding drums * Simple to change sandpaper by using standard rolls and cut to suit *
DRUM SANDER: SANDPAPER HOLDING CLIPS
SKU:
WBS300900