- Show All
- AUTO RECONDITIONING MACHINES
- AXLE STANDS
- BATTERY CHARGERS
- ENGINE STANDS
- GREASE & OILS
- HYDRAULIC BODY JACKS
- HYDRAULIC BOTTLE JACKS
- HYDRAULIC TOE JACKS
- HYDRAULIC TROLLEY JACKS
- HYD ENGINE CRANES
- HYD MOTORCYCLE LIFT
- HYD TRANSMISSION JACKS
- HYD SPRING COMPRESSOR
- HYD VEHICLE POSITIONING JACK
- GARAGE ESSENTIALS
- OIL DRAIN TANK
- PANEL BEATING EQUIPMENT
- WORKSHOP PRESSES
EDM: JM528DZ SUPER DRILL
$46,300.00
* The Joemars JM528DZ is fitted with the Fuzzy Logic control system
* Easy to learn and operate – new operator can learn the operation and be confident in only a few hours
* Includes 3 axis DRO system: X Y axis use linier scales Z axis uses encoder
* Five kinds of alarm indicators: will light up apon depth arrival arcing low dielectrics Anti hitting system for electrodes
* Using ‘MOSFET’ sparking circuits suitable for tungsten carbide hardened steel etc.
| Weight | 900 kg |
|---|
Description
| CAPACITY OF TANK | 10 Litres X 2Pc |
|---|---|
| WORK TABLE | 600 X 300mm |
| TRAVEL X | 350mm |
| TRAVEL Y | 250mm |
| SPINDLE HEADSTOCK TRAVEL | 345mm |
| MAX ELECTRODE WEIGHT | |
| MAX TABLE WEIGHT | 450kg |
| MAX WORKTABLE CLEARANCE | 355mm |
| MAX OUTPUT | |
| VOLTAGE | 380v 3 Phase |
| MAX PROCESSING SPEED | |
| WEIGHT NETT/GROSS | 900 / 900kg |
| VOLUME |
Shipping & Delivery
Related products
EDM: TR100 TAP REMOVER
SKU:
EDM100030
* Light small portable compct design
* High speed & high efficiency and low cost
* Simple operation easy remove broken taps
* Dielectric - using ordinary tap water as a machine dielectric liquid
* Using any brass bar as electrode
* Removal of taps will not damage the threads
* Auto feed 30deg both left and right depth setting selectable arcing timer Auto retract Alarm messages Depth arrival over-tempreture *
EDM: CNC DNC42+DN40 SUPERDRILL
SKU:
EDM100140
* The Joemars DNC42 is specially designed for drilling hard materials such as hardened steel aaloys & tungston carbide in ranges of 0.2mm-3.0 mm
* This CNC EDM drill is a production drilling machine controlled by a Heidenhain controller
*The newly developed sparking cercuits are special to the DNC42 EDM super drills to enhance machine speed excellent flushing lower wear & higher accuracy*
EDM: CNC DNC35 DRILLING
SKU:
EDM100200
* The Joemars CNC DNC35 Drilling EDM machine comes with arm type movable control panel design for operator comfort
* Stainless steel work table ensures stability
* Half submerged work table increases the performance of machining
* The Heidenhain TNC310 controller holds 100 sets of machining memories
* 6 Kinds of machining parameters
* Five kinds of alarm indicators
* RS-232-C/V.24 interface
* Plus many other fuctions *
EDM: CNC AWT555S WIRE CUT
SKU:
EDM100251
*Special upper / lower wire guide assembly, providing high-speed automatic wire threading in water and accuracy machining.
*Simple and reliable Automatic Threading Device, applies high precision accuracy and easy for operator's maintenance.
*Special anti-leaking system of low arm and work-tank, keeping axes movement smoothly.
*Special cooling system for low arm, providing high accuracy required while machining.
Hardened Stainless work-table enhances surface rigidity and well-support for work-piece.
FEATURES OF AUTOMATIC WIRE THREADING
A. Directly thread wire in submerged condition, saving the time and raising the working efficiency.
B. Wire threading at break point is achievable.
C. Upper water jet system achieves automatic wire threading with a thick workpiec
EDM: JM32NZ COMPACT
SKU:
EDM100310
EDM: JM430+AZ50R+D430
SKU:
EDM100330
EDM: JM430+AZ75DR+D430
SKU:
EDM100332
EDM: JM500+NZ50+D500
SKU:
EDM100340