- Show All
- AUTO RECONDITIONING MACHINES
- AXLE STANDS
- BATTERY CHARGERS
- ENGINE STANDS
- GREASE & OILS
- HYDRAULIC BODY JACKS
- HYDRAULIC BOTTLE JACKS
- HYDRAULIC TOE JACKS
- HYDRAULIC TROLLEY JACKS
- HYD ENGINE CRANES
- HYD MOTORCYCLE LIFT
- HYD TRANSMISSION JACKS
- HYD SPRING COMPRESSOR
- HYD VEHICLE POSITIONING JACK
- GARAGE ESSENTIALS
- OIL DRAIN TANK
- PANEL BEATING EQUIPMENT
- WORKSHOP PRESSES
OPEN SIDE SANDER: MS-3140 405MM 1100W
$0.00
* Compact single phase drum sander
* Variable speed feed table
* Bench mounted or stand is available
* Sandpaper is easily changed with standard 75mm wide sandpaper which is wound around the drum and fastened by clips at each end of tunhe drum
* Ideal for small workshop
* Maximum sanding width is 400mm.
| Weight | 126 kg |
|---|---|
| Dimensions | 0.92 × 0.61 × 0.67 cm |
Description
| MAX WIDTH | 405mm |
|---|---|
| MAX HEIGHT | 130mm |
| MIN LENGTH | 300mm |
| TYPE | Drum-Platen |
| DRUM SIZE | 132 x 410mm |
| DUST CHUTE | 4″ Dia |
| BELT SIZE | 406 X 1220mm |
| NUMBER OF BELTS | One |
| FEED SPEED | 0-3m/min |
| FEED MOTOR | 1/4hp |
| MAIN MOTOR | 1100w 1 Phase |
| DRUM SPEED | 1440rpm |
| WEIGHT NETT/GROSS | 85/126kg |
| VOLUME | 0.3760cm |
| PACKING L X W X H | 920 x 610 x 670mm |
Shipping & Delivery
Related products
OPEN SIDE SANDER: SD-15B 380MM
SKU:
WBS300280
* The combination head sander can be operated in three models: platen up platen down or platen level with the drum * With the platen up the sander fuctions as a contact roller: For sizing with a 60 to 120 grit belt * With the platen in level position with the drum intermediate and final finishing is possible: For example using a grit sequence of 100 and 150 * The platen only mode (platen below drum) is frequently used for sanding repairs mars or lacquer with fine (120-180) grits *
OPEN SIDE SANDER: SD-15B 380MM
SKU:
WBS300284
* The combination head sander can be operated in three models: platen up platen down or platen level with the drum * With the platen up the sander fuctions as a contact roller: For sizing with a 60 to 120 grit belt * With the platen in level position with the drum intermediate and final finishing is possible: For example using a grit sequence of 100 and 150 * The platen only mode (platen below drum) is frequently used for sanding repairs mars or lacquer with fine (120-180) grits *
OPEN SIDE SANDER: MS-3156 560MM 1500W
SKU:
WBS300290
* Compact single phase drum sander
* Variable speed feed table
* Bench mounted or stand is available
* Sandpaper is easily changed with standard 75mm wide sandpaper which is wound around the drum and fastened by clips at each end of tunhe drum
* Ideal for small workshop
* Maximum sanding width is 400mm.