- Show All
- AUTO RECONDITIONING MACHINES
- AXLE STANDS
- BATTERY CHARGERS
- ENGINE STANDS
- GREASE & OILS
- HYDRAULIC BODY JACKS
- HYDRAULIC BOTTLE JACKS
- HYDRAULIC TOE JACKS
- HYDRAULIC TROLLEY JACKS
- HYD ENGINE CRANES
- HYD MOTORCYCLE LIFT
- HYD TRANSMISSION JACKS
- HYD SPRING COMPRESSOR
- HYD VEHICLE POSITIONING JACK
- GARAGE ESSENTIALS
- OIL DRAIN TANK
- PANEL BEATING EQUIPMENT
- WORKSHOP PRESSES
REFLEX MOP: 50MM X 100P X 3MM ID
$29.00
* This reflex mop has a 3.0mm bore and is suitable for mounting on the 1/4″ dia mini spindles * Blue polishing compound is recomended for use with these mops *
• Reflex – Soft rougeing mop for finishing gold and especially silver – no rouge burn into silver.
Loosefold mops are normally used with finishing compounds such as Rouge, Menzerna, Wax 16, Sunblue, FF9, 309BX. A WDR mop can be used with Vienna Lime for the final clean up of aluminium, steel etc. Smaller diameter mops can be used with a taper on a drill, air tool etc. They are commonly used on a polishing motor.
| Weight | 0.09 kg |
|---|---|
| Dimensions | 0.06 × 0.06 × 0.05 cm |
In stock
Related products
PME W/S MOP: 75 X 2S 10MM
SKU:
BMA436908
PME W/S MOP: 75 X 3S 10MM
SKU:
BMA436910
PME W/S MOP: 100 X 1S 10MM
SKU:
BMA436912
PME W/S MOP: 100 X 2S 10MM
SKU:
BMA436914
POLISHING MOP: 250MM X 3 SECT
SKU:
BMA436970
POLISHING MOP: 300MM X 4 SECT
SKU:
BMA436980
REFLEX MOP: 150MM X 100P X 10MM ID
SKU:
BMA438034
* This reflex mop has a 10.0mm bore and is suitable for mounting on the 3/8"" dia mini spindles * Blue polishing compound is recomended for use with these mops *
• Reflex – Soft rougeing mop for finishing gold and especially silver – no rouge burn into silver.
Loosefold mops are normally used with finishing compounds such as Rouge, Menzerna, Wax 16, Sunblue, FF9, 309BX. A WDR mop can be used with Vienna Lime for the final clean up of aluminium, steel etc. Smaller diameter mops can be used with a taper on a drill, air tool etc. They are commonly used on a polishing motor.
DOLLY MOP: 150 X 75P X 10MM ID
SKU:
BMA439006
* These mini dolly polishing mops can be used on a bench polisher with a tapered pigtail. Or with a mandrel in a drill or air tool.
* Small polishing mop must be used with a polishing compound – Either a Medium cut and colour compound or polishing compound.
* If the item is badly scratched, use a dry sisal dollie with cutting compound first.
* To get the best finish you must have achieved a good pre-polish finish and have a good flat surface to create the best polished effect.
* A very universal mop that suits polishers, fabricators, sculptors, silversmiths etc.