- Show All
- AUTO RECONDITIONING MACHINES
- AXLE STANDS
- BATTERY CHARGERS
- ENGINE STANDS
- GREASE & OILS
- HYDRAULIC BODY JACKS
- HYDRAULIC BOTTLE JACKS
- HYDRAULIC TOE JACKS
- HYDRAULIC TROLLEY JACKS
- HYD ENGINE CRANES
- HYD MOTORCYCLE LIFT
- HYD TRANSMISSION JACKS
- HYD SPRING COMPRESSOR
- HYD VEHICLE POSITIONING JACK
- GARAGE ESSENTIALS
- OIL DRAIN TANK
- PANEL BEATING EQUIPMENT
- WORKSHOP PRESSES
Back in Stock Soon
RE-BAR BENDER/CUTTER: OFMER TP32/36 32MM 3PHASE
$11,000.00
* Ideal for construction sites with a limited volume of work
* Compact all in one design
* Fitted with self-breaking motor
* High-performance and easy to maintain, on which the manufacturer believes strongly
* Ofmer team of engineers puts its expertise at the disposal of the Customer, to make changes to the basic model – where necessary – and satisfy the needs and peculiarities of each market
| Weight | 465 kg |
|---|---|
| Dimensions | 1.2 × 0.9 × 1 cm |
Description
| DESCRIPTION: | Combination Bender + Cutter |
|---|---|
| MODEL | TP32 / 36 |
| BENDING CAPACITY | Ø32 mm Rebar x 1, |
| Ø22 mm Rebar x 2, | Ø18 mm Rebar x 3, |
| CUTTING CAPACITY | Ø25 mm Rebar x 1, |
| Ø16 mm Rebar x 2, | Ø14 mm Rebar x 3, |
| MOTOR RATING | 4 Hp / 3 kw |
| WEIGHT NETT/GROSS | 460/ 465kg |
| VOLUME | 1.080cm |
| PACKING SIZE L X W X H | L 1,200mm X W 900 X 1000 |
Shipping & Delivery
Related products
BLADES: OFMER CUTTER C34TMF
SKU:
BBR131265
BLADES: OFMER CUTTER C44TTF
SKU:
BBR131267
OFMER TP40 / 46: #330920 STIRRUP BENDING ACCESSORIES
SKU:
BBR131273
SQUARE PIN P34E/P38E-TP25E/TP32E – P32/36-
SKU:
BBR131282
* The possibility to cut and bend concrete reinforcing steel rods with one only product
* Ideal for construction sites with a rather limited volume of work.
* On the market for the past ten years on building sites throughout Italy
* The reduction gearbox and the cutting arm form a monobloc in spheroidal cast iron
* The total absence of welding gives the product considerable strength and sealing.
* MAll these units are standardly produced with a wide turning plate
* That permits to obtain large curving radii, and allows to perform the “double bending”
* The motor installed is self-breaking
* Made in manufactured in Italy and designed to optimize use.
RE-BAR BENDER: RB-25 230V 1 PHASE TOYAMA
SKU:
BBR131340
* The Toyama RC-25 rebar bender is a compact bench mounted unit
* Has a 25.0mm bending capacity
* Complete with two anvils and is suitable for round and flat bar bending
* Fitted with folding lifting handles on each side of the machine
* Powful 230v 1 phase motor
* Comes with two foot control units which allow for two bending angles without having to change settings
RE-BAR BENDER: SWB42 230V 1 PHASE HAWK
SKU:
BBR131350
* This SWB42 adops the fully enclosed gearbox seperated from the working disc
* This prevents distorsion even under heavy loads
* Fitted with dust proof brake motor
* Two limit switches ensure the accuracy of bends even after stopping and starting
* Powerful 3hp single phase motor
* All gears, gear shafts, working disc, stop guage, sadles, pile heads and pile head bushings are made of forged high quality alloy steel with proper heat treatment ( 2.0mm thick external case to ensure high performance under heavy loads for a long working life
REBAR CUTTER: 16.0MM CAPACITY 230V 1PH TLP
SKU:
RBC1891116
* This HHG-16D rebar cutter has a cutting capacity of 16.0mm
* Ideal onsite tool for steel placers
* With its hydraulic action it will cut through rebar effortlessly
* Open head for easy insertion of rebars
* Ram automaticly retracts when the cutting cycle is complete
* Recycle time is 2.5 - 3.0 seconds
* Blade are manufactured from quality high stregth steel which is specially hardened for durability and long service life
* Powerful 850w motor.
REBAR CUTTER: BEARINGS ODE
SKU:
RBC1891562