- Show All
- AUTO RECONDITIONING MACHINES
- AXLE STANDS
- BATTERY CHARGERS
- ENGINE STANDS
- GREASE & OILS
- HYDRAULIC BODY JACKS
- HYDRAULIC BOTTLE JACKS
- HYDRAULIC TOE JACKS
- HYDRAULIC TROLLEY JACKS
- HYD ENGINE CRANES
- HYD MOTORCYCLE LIFT
- HYD TRANSMISSION JACKS
- HYD SPRING COMPRESSOR
- HYD VEHICLE POSITIONING JACK
- GARAGE ESSENTIALS
- OIL DRAIN TANK
- PANEL BEATING EQUIPMENT
- WORKSHOP PRESSES
PARTING INSERT 3MM PH5135 ( PALBIT)
Excl. GST: $14.50
Incl. GST: $16.68
Incl. GST: $16.68
PARTING INSERT 5MM PH5135 (PALBIT)
Excl. GST: $14.50
Incl. GST: $16.68
Incl. GST: $16.68
PARTING INSERT 4MM PH5135 (PALBIT)
Excl. GST: $14.50
Incl. GST: $16.68
* Excellent chip control even when machining with a small depth of cut
* Suitable for machining with a variable depth of cut.Proper rake angle of cutting surface finish and low cutting resistance
* The MT-TiCN inner Coated is hard and wear-resisant against abrasive wear
* Techical Features (PHG) for high wear resistance and long life
| Weight | 0.001 kg |
|---|---|
| Dimensions | 0.1 × 0.03 × 0.03 cm |
In stock
Description
| DESCRIPTION | Carbide Parting & Grooving Insert |
|---|---|
| BRAND | PALBIT (EUROPE) SINCE 100YEARS |
| MODEL | SANCAR – 4N |
| SIZE | W = 4,0 b = 3,3 Re = 0,25 |
| BEST FOR | Parting and Grooving |
| SUIT TO TOOLHOLDER | LTP830003 |
| COATED | Top Coating (TIN) CVD- Alumina Coating |
| HEAT- RESISTANT SUBSTRADE | The cemented-carbide substrate adds high strength for application with focus on high material rmoval |
| APPLICATION | Wet and Dry Machining, External & Internal Turning. Roughing to finishing. |
| WEIGHT NETT/GROSS | 0.001KG |
| VOLUME | 0.0001cm |
Shipping & Delivery
Related products
PRG 2MM N TPC35 PARTING
SKU:
LTT500265
MRCN 30TIN32 3.0MM PARTING INSERT
SKU:
LTT800800
NCIH 19-2 2MM PARTING INSERT (NOW LTT944480)
SKU:
LTT800803
MGMN 200 2.0MM PARTING & GROOVING INSERT
SKU:
LTT800812
KC5025 A2030N00CF02 KC5025 PARTING INSERT
SKU:
LTT800978
TDFT 3E-0.40L TT7200 TAEGUTEC TURNING & GROOVING
SKU:
LTT801054
SECO 150.10-3N-14 T25M PARTING INSERTS
SKU:
LTT900053
PARTING INSERT 3MM PH5135 ( PALBIT)
SKU:
LTT944444
* Excellent chip control even when machining with a small depth of cut
* Suitable for machining with a variable depth of cut.Proper rake angle of cutting surface finish and low cutting resistance
* The MT-TiCN inner Coated is hard and wear-resisant against abrasive wear
* Techical Features (PHG) for high wear resistance and long life