- Show All
- AUTO RECONDITIONING MACHINES
- AXLE STANDS
- BATTERY CHARGERS
- ENGINE STANDS
- GREASE & OILS
- HYDRAULIC BODY JACKS
- HYDRAULIC BOTTLE JACKS
- HYDRAULIC TOE JACKS
- HYDRAULIC TROLLEY JACKS
- HYD ENGINE CRANES
- HYD MOTORCYCLE LIFT
- HYD TRANSMISSION JACKS
- HYD SPRING COMPRESSOR
- HYD VEHICLE POSITIONING JACK
- GARAGE ESSENTIALS
- OIL DRAIN TANK
- PANEL BEATING EQUIPMENT
- WORKSHOP PRESSES
AKYAPAK: SLIP ROLLS 2100MM X 6.0MM 2.2KW
$54,000.00
* Machine body is all heavy steel construction
* All rollers are mounted in quality bearing
* Cover controlled from control panel in order to release easily bended metal sheet and lift upper rolls
| Weight | 2100 kg |
|---|---|
| Dimensions | 3.947 × 1.16 × 1.08 cm |
Description
| DESCRIPTION | Slip Rolls Width 2100mm |
|---|---|
| CAPICITY MILD STEEL | 6.0mm |
| TOP ROLL DIAMETER | 160mm |
| SIDE ROLL DIAMETER | 180mm |
| MIN FORMING RADIUS | Top Roll Dia x 3 |
| GEAR RATIO | |
| ROLL SPEED | 4.5m/min |
| MAIN MOTOR | 2.2kw |
| RISE & FALL MOTOR | |
| WEIGHT NETT/GROSS | 2100 Kg |
| VOLUME | 4.9448cm |
| PACKING L x H x W | 3947 x 1160 x 1080mm |
Shipping & Delivery
Related products
AKYAPAK: HYDRAULIC AHS ROLLS: 3100 X 6.0MM
SKU:
ROL131265
* 4 Roller Plate bending machine
* Precise pinching of plate between top and bottom rolls.
* Legth of flat ends minimised.
* Cone rolling device
* Induction hardened rolls
* Fully welded steel (St -52 frame)
* Dual bending speed
* Hydraulic open and close operated from control panel
* Top and Bottom (central rolls) driven by hydraulic motor and planetary gear reducer
AKYAPAK: SLIP ROLLS 1250 X 3.0MM
SKU:
ROL131271
AKYAPAK: SLIP ROLLS ASM 1300 X 6.5MM
SKU:
ROL131277
* Body is made of cast-iron construction.
* Rolling driven by electric motor + reducer
* Upper roll is openable by side.
* Lower and back rolls are adjutable up and down with hand wheel.
* Self brake main motor
* Cone rolling device
* Seaparate moveable control panel and foot pedal
* Suitable for CE standard.
SLIP ROLLS: 3000 X 10.0MM BENZEL
SKU:
ROL131490
* Two rolls powered by gearbox and gear system
* Swing out end enables complete cylinder to be removed
* Heavy duty steel welded main frames
* Mobile control panel with foot pedals
* Precision ground rolls with wiring grooves
* Safety wire interlock system with emergency shut-off
* Motorised up & down top roll for curving adjustment
ER INITAL PINCH ROLING MACHINE: 2000 X 4.0MM
SKU:
ROL131502
* Initial pinch rolls with pre-bending
* Motorised up & down rear curving roll enables quick & easy pre-bending
* Digital readout display on rear curving roll position
* Mobile foot pedal control with digital readout display
* Two rolls are powered by reduction gearbox drive system
* Swing out top roller enables cone or cylinder to be removed
* Safety wire interlock system with emergency shut-off
* Rolls include wiring grooves
SLIP ROLLS: 3200MM X 6.0MM BENZEL 5HP
SKU:
ROL131530
* The Hydraulic Initial pinch rollsa are designed for shop fabricator.
* All rolls are hardened to 50RC to reduce scratching and pitting.
* These are journalled in high quality roller bearing to provide longer life.
* A unique device is the Pinch Gauging Device for added efficiency.
* Standard LED readout provides fast and easy positioning of the rear bending roll for repetitive work.
GEAR SETS: TO SUIT ROL132000
SKU:
ROL132001
SLIP ROLLS: 1300MM X 1.5MM FLANGED MOTOR 1HP !PH (only)
SKU:
ROL132006