- Show All
- AUTO RECONDITIONING MACHINES
- AXLE STANDS
- BATTERY CHARGERS
- ENGINE STANDS
- GREASE & OILS
- HYDRAULIC BODY JACKS
- HYDRAULIC BOTTLE JACKS
- HYDRAULIC TOE JACKS
- HYDRAULIC TROLLEY JACKS
- HYD ENGINE CRANES
- HYD MOTORCYCLE LIFT
- HYD TRANSMISSION JACKS
- HYD SPRING COMPRESSOR
- HYD VEHICLE POSITIONING JACK
- GARAGE ESSENTIALS
- OIL DRAIN TANK
- PANEL BEATING EQUIPMENT
- WORKSHOP PRESSES
BANDSAW: KV-60A METAL 1PH VERTICAL AUTO TABLE FEED
$18,229.00
* Manufactured in Taiwan
* Large throat capacity (610mm)
* Comes with blade butt welder and grinder
* Emergency stop button
* Low voltage work lamp
* Complete with rip fence
* Table tilt to 15 degrees
* CE certificate
* Fitted with auto table feed
| Weight | 530 kg |
|---|---|
| Dimensions | 1.45 × 0.76 × 2.14 cm |
Description
| DESCRIPTION | Metal Cutting Bandsaw |
|---|---|
| TYPE | Verticle |
| MODEL | KV-60A |
| TABLE SIZE | 600 x 500mm |
| MAX CUTTING WIDTH | 610mm |
| MAX CUTTING HEIGHT | 340mm |
| BLADE SPEED (LOW) | 10 – 82m/min |
| BLADE SPEED (HIGH) | 230 – 1050m/min |
| BLADE SIZE | 3970 x 16.0mm |
| BUTT WELDER | 2.4kva |
| BUTT WELDER CAPACITY | 3.0 – 16.0mm |
| MAIN MOTOR | 2.0hp 230v 1 Phase |
| TABLE FEED MOTOR | |
| WEIGHT NETT/GROSS | 510/530kg |
| VOLUME | 2.3583cm |
| PACKING Y x W x H | 1450 x 760 x 2140mm |
Shipping & Delivery
Related products
BANDSAW: KB-30 1/2HP 1PH VERTICLE (TAIWAN)
SKU:
BSM993970
* 310 x 175mm (W x H) rectangular capacity
* Cutting speeds are infinitely variable
* Variable blade speed is adjusted via hand wheel
* Adjustable blade guides top & bottom (tungsten tipped)
* Top blade guide is adjustable by hand wheel
Blade tensioning via hand wheel
* Robust steel frame and cast iron table
Table tilts ±15º in all four directions
* Blade welding unit with annealing device, blade shear, & grinder fitted to front of machine for convenient blade welding
* Blade air blower clears swarf away
* Includes flexible work light
* Made in Taiwan
BANDSAW: TJ-400 METAL VERTICLE (TAIWAN)
SKU:
BSM993980
BANDSAW: TJ-450 METAL 3PH VERTICLE (TAIWAN)
SKU:
BSM994000
* Robust machine that would complement any workshop
* Speed change is altered by handwheel situated at the on one side of the machine
* Heavy cast table and strong metal base to support your workpiece
* Table tilts 15ø both left and right
* Complete with welder which allows the customer to make his own blades on the spot
* Also equipped with a grinder to finished making the blade off
* A blade shear is also mounted on the machine for convenience for cutting the blades to set length
BANDSAW: BS-450 METAL 1PH VERTICAL (TAIWAN)
SKU:
BSM994010
* Robust machine that would compliment any workshop.
* Speed is changed using a handwheel situated on the side of the machine.
* Large cast table and strong metal base to support your workpiece.
* Tungsten tipped adjustable blade guides, top & bottom.
* Table tilts 15ø in all directions.
* Complete with a cutter, welder and grinder, which allows the user to make blades on the spot.
BANDSAW: TJ-500 METAL 1PH VERTICAL(TAIWAN)
SKU:
BSM994020
BANDSAW: TJ-700D METAL 1PH VERTICAL (TAIWAN)
SKU:
BSM994032
BANDSAW: KS-60 METAL 1PH VERTICAL
SKU:
BSM994060
BANDSAW: KC-100 METAL 1PH VERTICAL INVERTER V/SPEED
SKU:
BSM994084