- Show All
- AUTO RECONDITIONING MACHINES
- AXLE STANDS
- BATTERY CHARGERS
- ENGINE STANDS
- GREASE & OILS
- HYDRAULIC BODY JACKS
- HYDRAULIC BOTTLE JACKS
- HYDRAULIC TOE JACKS
- HYDRAULIC TROLLEY JACKS
- HYD ENGINE CRANES
- HYD MOTORCYCLE LIFT
- HYD TRANSMISSION JACKS
- HYD SPRING COMPRESSOR
- HYD VEHICLE POSITIONING JACK
- GARAGE ESSENTIALS
- OIL DRAIN TANK
- PANEL BEATING EQUIPMENT
- WORKSHOP PRESSES
BLADES TO SUIT: MANUAL NUT SPLITER
Excl. GST: $225.00
Incl. GST: $258.75
Incl. GST: $258.75
SANDING BELT: 30 X 533mm 120 GRIT
Excl. GST: $4.50
Incl. GST: $5.18
Incl. GST: $5.18
RE-BAR BENDER: SWB42 230V 1 PHASE HAWK
Excl. GST: $4,850.00
Incl. GST: $5,577.50
* This SWB42 adops the fully enclosed gearbox seperated from the working disc
* This prevents distorsion even under heavy loads
* Fitted with dust proof brake motor
* Two limit switches ensure the accuracy of bends even after stopping and starting
* Powerful 3hp single phase motor
* All gears, gear shafts, working disc, stop guage, sadles, pile heads and pile head bushings are made of forged high quality alloy steel with proper heat treatment ( 2.0mm thick external case to ensure high performance under heavy loads for a long working life
| Weight | 365 kg |
|---|---|
| Dimensions | 0.8 × 0.87 × 1 cm |
Description
| DESCRIPTION | Rebar Bender |
|---|---|
| MODEL | SWB42 |
| BENDING CAPACITY | 6.0-42.0mm |
| OPERATION | Manual |
| MOTOR POWER | 3HP 1 Phase |
| TYPE OF MOTOR | Brake Motor |
| MOTOR ROTATION SPEED | 1430 rpm |
| SPEED OF WORKING DISC | 12 rpm |
| WEIGHT NETT/GROSS | 365/ 405kg |
| VOLUME | 0.6996cm |
| PACKING | L 800mm X W 870 X H 1,000 |
Shipping & Delivery
Related products
BLADES: OFMER CUTTER C44TTF
SKU:
BBR131267
BLADES TO SUIT OFMER TP32 / 36 1 set = 2 pcs
SKU:
BBR131270
BLADES TO SUIT OFMER C56TFF11 1 set = 2 pcs
SKU:
BBR131271
OFMER TP40 / 46: #240002 SPIRAL DEVICE ACCESSORIES
SKU:
BBR131274
OFMER TP40 / 46: #194050 BUSH HOLDING PIN P42-P44
SKU:
BBR131277
RE-BAR BENDER: RB-32 230V 1 PHASE TOYAMA
SKU:
BBR131342
* The Toyama RC-32 rebar bender is a compact unit with a 32.0mm bending capacity
* Comes complete with two anvils and is suitable for round and flat bar bending
* Fitted with folding lifting handles on each side of the machine
* Powful 230v 1 phase motor
* Comes with two foot control units which allow for two bending angles without having to change settings
REBAR CUTTER: 16.0MM HYDRAULIC MANUAL HAND
SKU:
RBC1891010
REBAR CUTTER: 16.0MM CAPACITY 230V 1PH RA-16
SKU:
RBC1891014
* This RC-16 rebar cutter has a cutting capacity of 16.0mm
* Ideal onsite tool for steel placers
* With its hydraulic action it will cut through rebar effortlessly
* Open head for easy insertion of rebars
* Ram automaticly retracts when the cutting cycle is complete
* Recycle time 2.5 - 3.0 seconds
* Blade are manufactured from quality high stregth steel which is specially hardened for durability and long service life