- Show All
- AUTO RECONDITIONING MACHINES
- AXLE STANDS
- BATTERY CHARGERS
- ENGINE STANDS
- GREASE & OILS
- HYDRAULIC BODY JACKS
- HYDRAULIC BOTTLE JACKS
- HYDRAULIC TOE JACKS
- HYDRAULIC TROLLEY JACKS
- HYD ENGINE CRANES
- HYD MOTORCYCLE LIFT
- HYD TRANSMISSION JACKS
- HYD SPRING COMPRESSOR
- HYD VEHICLE POSITIONING JACK
- GARAGE ESSENTIALS
- OIL DRAIN TANK
- PANEL BEATING EQUIPMENT
- WORKSHOP PRESSES
MIXER: 120 X 10 X 600MM 201
$7.00
* This mixer is suitable for mixing paint or high vicosity materials
| Weight | 0.16 kg |
|---|---|
| Dimensions | 0.6 × 0.13 × 0.13 cm |
In stock
SKU:
MIX154300
Category: PAINT MIXER
Description
| TYPE | Paint & Mud Mixer |
|---|---|
| MODEL | 201 |
| LENGTH | 120 x 10 x 600mm |
| SUIT | Power Tool |
| SHAFT SIZE | 10.0mm |
| WEIGHT NETT/GROSS | 0.160kg |
| VOLUME | 0.0101cm |
Shipping & Delivery
Related products
PAINT: HAMMERED SILVER HAMMERITE 750ML TIN
SKU:
BRS400110
$55.75
* Hammerite paint is a single pack, air drying corrosion resistant and decrotive coating * It is based on stynthetic resins and is suitably pigmented for optimum weathering properties * Hammerite is fast drying and capible of multi-coat applications any time after 4 hours * The specialy selected resins impart a gloss or satin finish which resists dirt pick up * Hammerite has excellent wetting properties making it tolerant to poorly prepared ferous surfaces *
Preperation:
Clean and remove surace rust incliuding oils and grease.
Apply direct to the rusty surface after wire brushing with a brush or roller.
Hammerite will be touch dry in 2 hours and ready for second coat after 4 hours.
PAINT: HAMMERED BLACK HAMMERITE 750ML TIN
SKU:
BRS400112
$55.75
* Hammerite paint is a single pack, air drying corrosion resistant and decrotive coating * It is based on stynthetic resins and is suitably pigmented for optimum weathering properties * Hammerite is fast drying and capible of multi-coat applications any time after 4 hours * The specialy selected resins impart a gloss or satin finish which resists dirt pick up * Hammerite has excellent wetting properties making it tolerant to poorly prepared ferous surfaces *
Preperation:
Clean and remove surace rust incliuding oils and grease.
Apply direct to the rusty surface after wire brushing with a brush or roller.
Hammerite will be touch dry in 2 hours and ready for second coat after 4 hours.
MIXER: 60 X 8 X 400MM 204
SKU:
MIX154330
$24.86
