- Show All
- AUTO RECONDITIONING MACHINES
- AXLE STANDS
- BATTERY CHARGERS
- ENGINE STANDS
- GREASE & OILS
- HYDRAULIC BODY JACKS
- HYDRAULIC BOTTLE JACKS
- HYDRAULIC TOE JACKS
- HYDRAULIC TROLLEY JACKS
- HYD ENGINE CRANES
- HYD MOTORCYCLE LIFT
- HYD TRANSMISSION JACKS
- HYD SPRING COMPRESSOR
- HYD VEHICLE POSITIONING JACK
- GARAGE ESSENTIALS
- OIL DRAIN TANK
- PANEL BEATING EQUIPMENT
- WORKSHOP PRESSES
TAPER PIN REAMER: 2.0MM RANGE 1.9MM – 2.26MM
$34.50
* Another quality tool from Somta SA
* Manufactured from quality HSS-M2 for durability and long service life.
* A precision tapered reamer is used to make a tapered hole to later receive a tapered pin.
* A taper pin is a self tightening device due to the shallow angle of the taper.
* They may be driven into the tapered hole such that removal can only be done with a hammer and punch.
* They are sized by a number sequence (for example, a No.4 reamer would use No.4 taper pins).
| Weight | 0.06 kg |
|---|---|
| Dimensions | 0.1 × 0.03 × 0.02 cm |
In stock
Related products
TAPER PIN REAMER: 2.5MM RANGE 2.40MM-3.36MM STRAIGHT FLUTE
SKU:
REM4388195
* Another quality tool from Somta SA
* Manufactured from quality HSS-M2 for durability and long service life.
* A precision tapered reamer is used to make a tapered hole to later receive a tapered pin.
* A taper pin is a self tightening device due to the shallow angle of the taper.
* They may be driven into the tapered hole such that removal can only be done with a hammer and punch.
* They are sized by a number sequence (for example, a No.4 reamer would use No.4 taper pins).
TAPER PIN REAMER: 10.0MM (SOMTA) STR/FLUTE
SKU:
REM4388205
* Another quality tool from Somta SA
* Manufactured from quality HSS-M2 for durability and long service life.
* A precision tapered reamer is used to make a tapered hole to later receive a tapered pin.
* A taper pin is a self tightening device due to the shallow angle of the taper.
* They may be driven into the tapered hole such that removal can only be done with a hammer and punch.
* They are sized by a number sequence (for example, a No.4 reamer would use No.4 taper pins).
TAPER PIN REAMER: 9/32″ NO.5 XSTRAIGHT FLUTE (SOMTA)
SKU:
REM4389110
* Another quality tool from Somta SA
* Manufactured from quality HSS-M2 for durability and long service life.
* A precision tapered reamer is used to make a tapered hole to later receive a tapered pin.
* A taper pin is a self tightening device due to the shallow angle of the taper.
* They may be driven into the tapered hole such that removal can only be done with a hammer and punch.
* They are sized by a number sequence (for example, a No.4 reamer would use No.4 taper pins).
TAPER PIN REAMER: 11/32″ NO.6 STRAIGHT FLUTE (SOMTA)
SKU:
REM4389112
* Another quality tool from Somta SA
* Manufactured from quality HSS-M2 for durability and long service life.
* A precision tapered reamer is used to make a tapered hole to later receive a tapered pin.
* A taper pin is a self tightening device due to the shallow angle of the taper.
* They may be driven into the tapered hole such that removal can only be done with a hammer and punch.
* They are sized by a number sequence (for example, a No.4 reamer would use No.4 taper pins).
TAPER PIN REAMER: 7/16″ STRAIGHT SHANK (SOMTA)
SKU:
REM4389115
* Another quality tool from Somta SA
* Manufactured from quality HSS-M2 for durability and long service life.
* A precision tapered reamer is used to make a tapered hole to later receive a tapered pin.
* A taper pin is a self tightening device due to the shallow angle of the taper.
* They may be driven into the tapered hole such that removal can only be done with a hammer and punch.
* They are sized by a number sequence (for example, a No.4 reamer would use No.4 taper pins).
TAPER PIN REAMER: 3/4″ NO.10 STRAIGHT FLUTE
SKU:
REM4389119
* Manufactured from quality HSS-M2 for durability and long service life.
* A precision tapered reamer is used to make a tapered hole to later receive a tapered pin.
* A taper pin is a self tightening device due to the shallow angle of the taper.
* They may be driven into the tapered hole such that removal can only be done with a hammer and punch.
* They are sized by a number sequence (for example, a No.4 reamer would use No.4 taper pins).
MORSE TAPER REAMER: MT2 STRAIGHT FLUTE
SKU:
REM500152
MORSE TAPER REAMER: MT3 STRAIGHT FLUTE
SKU:
REM500154