- Show All
- AUTO RECONDITIONING MACHINES
- AXLE STANDS
- BATTERY CHARGERS
- ENGINE STANDS
- GREASE & OILS
- HYDRAULIC BODY JACKS
- HYDRAULIC BOTTLE JACKS
- HYDRAULIC TOE JACKS
- HYDRAULIC TROLLEY JACKS
- HYD ENGINE CRANES
- HYD MOTORCYCLE LIFT
- HYD TRANSMISSION JACKS
- HYD SPRING COMPRESSOR
- HYD VEHICLE POSITIONING JACK
- GARAGE ESSENTIALS
- OIL DRAIN TANK
- PANEL BEATING EQUIPMENT
- WORKSHOP PRESSES
JOBBER DRILL: 8.5MM HSS-Co5 TiAIN RED BAND (SOMTA)
$19.60
* These Red Band Somta Jobber drills come with TIAIN finished for durability and long service life
* The length of the flutes is between nine and fourteen times the diameter of the drill, depending on the drill size
* The Red Band drills are suitable for drilling tough treatable steels and offer clean cutting with minimal effort *
| Weight | 0.01 kg |
|---|---|
| Dimensions | 0.13 × 0.03 × 0.02 cm |
In stock
Description
| DESCRIPTION | Jobber Drill – Red Band |
|---|---|
| DIAMETER | 8.5mm |
| MATERIAL | HSS-Co5 5% Cobalt M35 |
| LENGTH O/A | 117.0mm |
| FLUTE LENGTH | 75.0mm |
| SHANK DIAMETER | 9.0mm |
| FINISH | Tiain DIN338 |
| DRILL POINT | 130 Deg |
| WEIGHT NETT/GROSS | 0.01kg |
| VOLUME | 0.0001cm |
| SUITABLE FOR | Touch treatable steel Titanium or Stainless Steel |
Shipping & Delivery
Related products
JOBBER DRILL: 5.5MM NDX HSS Co5 COBALT (SOMTA)
SKU:
DBT1770550
* These quality NDX drills are manufactured by Somta
* HSS-M35 drill bits contain 5% cobalt and are suitable for drilling harder materials like high tensile steels and other differcult materials
* Thus offering a substainable cutting edge with durability and a long service life
* Drill point is 130deg split point
JOBBER DRILL: 1.05 HSS-M2 ETS
SKU:
DBT2060105
* Jobber-length drills are the most common type of drill
* The length of the flutes is between nine and fourteen times the diameter of the drill, depending on the drill size
* So a 1⁄2 in (12.7 mm) diameter drill will be able to drill a hole 4 1⁄2 in (114.3 mm) deep since it is nine times the diameter in length
* A 1⁄8 in (3.2 mm) diameter drill can drill a hole 1 5⁄8 in (41.3 mm) deep since it is thirteen times the diameter in flute length
* These jobber drill bits are manufactured from quality HSS-M2 for durability and long service life * Aircraft length drill *
JOBBER DRILL: 1.25 HSS-M2 ETS
SKU:
DBT2060125
* Jobber-length drills are the most common type of drill
* The length of the flutes is between nine and fourteen times the diameter of the drill, depending on the drill size
* So a 1⁄2 in (12.7 mm) diameter drill will be able to drill a hole 4 1⁄2 in (114.3 mm) deep since it is nine times the diameter in length
* A 1⁄8 in (3.2 mm) diameter drill can drill a hole 1 5⁄8 in (41.3 mm) deep since it is thirteen times the diameter in flute length
* These jobber drill bits are manufactured from quality HSS-M2 for durability and long service life
* Aircraft length drill *
JOBBER DRILL: 1.35 HSS-M2 ETS
SKU:
DBT2060135
* Jobber-length drills are the most common type of drill
* The length of the flutes is between nine and fourteen times the diameter of the drill, depending on the drill size
* So a 1⁄2 in (12.7 mm) diameter drill will be able to drill a hole 4 1⁄2 in (114.3 mm) deep since it is nine times the diameter in length
* A 1⁄8 in (3.2 mm) diameter drill can drill a hole 1 5⁄8 in (41.3 mm) deep since it is thirteen times the diameter in flute length
* These jobber drill bits are manufactured from quality HSS-M2 for durability and long service life
* Aircraft length drill *
JOBBER DRILL: 1.40 HSS-M2 ETS
SKU:
DBT2060140
* Jobber-length drills are the most common type of drill
* The length of the flutes is between nine and fourteen times the diameter of the drill, depending on the drill size
* So a 1⁄2 in (12.7 mm) diameter drill will be able to drill a hole 4 1⁄2 in (114.3 mm) deep since it is nine times the diameter in length
* A 1⁄8 in (3.2 mm) diameter drill can drill a hole 1 5⁄8 in (41.3 mm) deep since it is thirteen times the diameter in flute length
* These jobber drill bits are manufactured from quality HSS-M2 for durability and long service life
* Aircraft length drill *
JOBBER DRILL: 1.90 HSS-M2 ETS
SKU:
DBT2060190
* Jobber-length drills are the most common type of drill
* The length of the flutes is between nine and fourteen times the diameter of the drill, depending on the drill size
* So a 1⁄2 in (12.7 mm) diameter drill will be able to drill a hole 4 1⁄2 in (114.3 mm) deep since it is nine times the diameter in length
* A 1⁄8 in (3.2 mm) diameter drill can drill a hole 1 5⁄8 in (41.3 mm) deep since it is thirteen times the diameter in flute length
* These jobber drill bits are manufactured from quality HSS-M2 for durability and long service life
* Aircraft length drill *
JOBBER DRILL: 1.95 HSS-M2 ETS
SKU:
DBT2060195
* Jobber-length drills are the most common type of drill
* The length of the flutes is between nine and fourteen times the diameter of the drill, depending on the drill size
* So a 1⁄2 in (12.7 mm) diameter drill will be able to drill a hole 4 1⁄2 in (114.3 mm) deep since it is nine times the diameter in length
* A 1⁄8 in (3.2 mm) diameter drill can drill a hole 1 5⁄8 in (41.3 mm) deep since it is thirteen times the diameter in flute length
* These jobber drill bits are manufactured from quality HSS-M2 for durability and long service life
* Aircraft length drill *
JOBBER DRILL: 6.20 HSS-M2 ETS
SKU:
DBT2060620
* Jobber-length drills are the most common type of drill
* The length of the flutes is between nine and fourteen times the diameter of the drill, depending on the drill size
* So a 1⁄2 in (12.7 mm) diameter drill will be able to drill a hole 4 1⁄2 in (114.3 mm) deep since it is nine times the diameter in length
* A 1⁄8 in (3.2 mm) diameter drill can drill a hole 1 5⁄8 in (41.3 mm) deep since it is thirteen times the diameter in flute length
* These jobber drill bits are manufactured from quality HSS-M2 for durability and long service life
* Aircraft length drill *