- Show All
- AUTO RECONDITIONING MACHINES
- AXLE STANDS
- BATTERY CHARGERS
- ENGINE STANDS
- GREASE & OILS
- HYDRAULIC BODY JACKS
- HYDRAULIC BOTTLE JACKS
- HYDRAULIC TOE JACKS
- HYDRAULIC TROLLEY JACKS
- HYD ENGINE CRANES
- HYD MOTORCYCLE LIFT
- HYD TRANSMISSION JACKS
- HYD SPRING COMPRESSOR
- HYD VEHICLE POSITIONING JACK
- GARAGE ESSENTIALS
- OIL DRAIN TANK
- PANEL BEATING EQUIPMENT
- WORKSHOP PRESSES
GUN TAP: M3 X 0.5 SPIRAL POINT METRIC COARSE
$16.00
* This is a Metric Spiral Point (Gun) machine tap
* Manufactured from quality HSS-M2 for durability and long service life
* Suitable for tapping blind or through holes
* Straight flute with angular cutting face at point
* Flutes are shallow and can stand a greater force
* Avery popular machine tap for general purpose use
| Weight | 0.01 kg |
|---|---|
| Dimensions | 0.1 × 0.03 × 0.03 cm |
In stock
Related products
GUN TAP: UNC 1/4″ X 20 SPIRAL POINT (SOMTA) MACH/ TAP
SKU:
TAP3111014
* UNC (Unified National Course) This is a standard thread form adopted by countries like, USA, Canada and UK.
* * Manufactured from quality HSS-M2 for durability and long service life
* Thread Profile: Similar to Metric and is 60deg form
* The crest is flat and the thread has a clearance at the root allowing internal and external to mate easily.
Spiral point taps have the same general physical dimensions as standard straight flute taps. However, the spiral point tap has the cutting face of the first few threads cut at a predetermined angle relative to the tap's axis angle to force the evacuation of chips ahead of the cutting action..
GUN TAP: UNC NO8 4.17 X 32 SPIRAL POINT (SOMTA) MACH/ TAP
SKU:
TAP3111017
* UNC (Unified National Course) This is a standard thread form adopted by countries like, USA, Canada and UK.
* * Manufactured from quality HSS-M2 for durability and long service life
* Thread Profile: Similar to Metric and is 60deg form
* The crest is flat and the thread has a clearance at the root allowing internal and external to mate easily.
Spiral point taps have the same general physical dimensions as standard straight flute taps.
* However, the spiral point tap has the cutting face of the first few threads cut at a predetermined angle relative to the tap's axis angle to force the evacuation of chips ahead of the cutting action.
GUN TAP: UNC 3/4″ X 11 SPIRAL POINT (SOMTA) MACH/ TAP
SKU:
TAP3111028
* UNC (Unified National Course) This is a standard thread form adopted by countries like, USA, Canada and UK.
* * Manufactured from quality HSS-M2 for durability and long service life
* Thread Profile: Similar to Metric and is 60deg form
* The crest is flat and the thread has a clearance at the root allowing internal and external to mate easily.
Spiral point taps have the same general physical dimensions as standard straight flute taps. However, the spiral point tap has the cutting face of the first few threads cut at a predetermined angle relative to the tap's axis angle to force the evacuation of chips ahead of the cutting action.
TAP: UNF 5/16″ X 24 SPIRAL POINT (SOMTA) MACH/ TAP
SKU:
TAP3112016
* UNF (Unified National Fine) This is a standard thread form adopted by countries like, USA, Canada and UK.
* Manufactured from quality HSS-M2 for durability and long service life
* Thread Profile: Similar to Metric and is 60deg form
* The crest is flat and the thread has a clearance at the root allowing internal and external to mate easily.
Spiral point taps have the same general physical dimensions as standard straight flute taps. However, the spiral point tap has the cutting face of the first few threads cut at a predetermined angle relative to the tap's axis angle to force the evacuation of chips ahead of the cutting action.t.
TAP: UNF 9/16″ X 18 SPIRAL POINT (SOMTA) MACH/ TAP
SKU:
TAP3112024
l* UNF (Unified National Fine) This is a standard thread form adopted by countries like, USA, Canada and UK.
* Manufactured from quality HSS-M2 for durability and long service life
* Thread Profile: Similar to Metric and is 60deg form
* The crest is flat and the thread has a clearance at the root allowing internal and external to mate easily.
* This fine thread stripping and is better than the coarse thread when internal and external threads are engaged and subject to load
* This tread is also used when there is a limitation on the length of engagement.
TAP: UNF 3/4″ X 16 SPIRAL POINT (SOMTA) MACH/ TAP
SKU:
TAP3112028
* UNF (Unified National Fine) This is a standard thread form adopted by countries like, USA, Canada and UK.
* Manufactured from quality HSS-M2 for durability and long service life
* Thread Profile: Similar to Metric and is 60deg form
* The crest is flat and the thread has a clearance at the root allowing internal and external to mate easily.
* This fine thread stripping and is better than the coarse thread when internal and external threads are engaged and subject to load
* This tread is also used when there is a limitation on the length of engagement.
TAP: UNF 7/8″ X 14 SPIRAL POINT (SOMTA) MACH/ TAP
SKU:
TAP3112030
* UNF (Unified National Fine) This is a standard thread form adopted by countries like, USA, Canada and UK.
* Manufactured from quality HSS-M2 for durability and long service life
* Thread Profile: Similar to Metric and is 60deg form
* The crest is flat and the thread has a clearance at the root allowing internal and external to mate easily.
* This fine thread stripping and is better than the coarse thread when internal and external threads are engaged and subject to load
* This tread is also used when there is a limitation on the length of engagement.
TAP: UNF 1″ X 12 SPIRAL POINT (S0MTA) MACH/ TAP
SKU:
TAP3112032
* UNF (Unified National Fine) This is a standard thread form adopted by countries like, USA, Canada and UK.
* Manufactured from quality HSS-M2 for durability and long service life
* Thread Profile: Similar to Metric and is 60deg form
* The crest is flat and the thread has a clearance at the root allowing internal and external to mate easily.
* This fine thread stripping and is better than the coarse thread when internal and external threads are engaged and subject to load
* This tread is also used when there is a limitation on the length of engagement.