- Show All
- AUTO RECONDITIONING MACHINES
- AXLE STANDS
- BATTERY CHARGERS
- ENGINE STANDS
- GREASE & OILS
- HYDRAULIC BODY JACKS
- HYDRAULIC BOTTLE JACKS
- HYDRAULIC TOE JACKS
- HYDRAULIC TROLLEY JACKS
- HYD ENGINE CRANES
- HYD MOTORCYCLE LIFT
- HYD TRANSMISSION JACKS
- HYD SPRING COMPRESSOR
- HYD VEHICLE POSITIONING JACK
- GARAGE ESSENTIALS
- OIL DRAIN TANK
- PANEL BEATING EQUIPMENT
- WORKSHOP PRESSES
TAP: BSPT 1/2″ X 14 TAPER HAND TAP
$65.00
* Manufactured by Somta SA
* British Standard Pipe Taper = BSPT
* These BSPT Taps are made from quality HSS-M2 for durability and long service life
* Whitworth vee form with 55 degrees
* Taper is 1 to 16
* Every 16.0mm increase in length the diameter increases by 1.0mm
* Widely used for connecting and sealing pipe ends by screwing the external thread to the internal thread
| Weight | 0.132 kg |
|---|---|
| Dimensions | 0.11 × 0.03 × 0.03 cm |
In stock
Related products
TAP: BSPT 1/8″ X 28 TAPER HAND TAP (SOMTA)
SKU:
TAP3335010
* Manufactured by Somta SA
* British Standard Pipe Taper = BSPT
* These BSPT Taps are made from quality HSS-M2 for durability and long service life
* Whitworth vee form with 55 degrees, Taper is 1 to 16
* Every 16.0mm increase in length the diameter increases by 1.0mm
* Widely used for connecting and sealing pipe ends by screwing the external thread to the internal thread
* This is a Taper tap with a 8 thread lead in
TAP: BSPT 1/4″ X 19 TAPER HAND TAP
SKU:
TAP3335015
* Manufactured by Somta SA
* British Standard Pipe Taper = BSPT
* These BSPT Taps are made from quality HSS-M2 for durability and long service life
* Whitworth vee form with 55 degrees
* Taper is 1 to 16
* Every 16.0mm increase in length the diameter increases by 1.0mm
* Widely used for connecting and sealing pipe ends by screwing the external thread to the internal thread
TAP: BSPT 3/8″ X 19 BOTTOM HAND TAP (SOMTA)
SKU:
TAP3335022
* Manufactured by Somta SA
* British Standard Pipe Taper = BSPT
* These BSPT Taps are made from quality HSS-M2 for durability and long service life
* Whitworth vee form with 55 degrees
* Taper is 1 to 16
* Every 16.0mm increase in length the diameter increases by 1.0mm
* Widely used for connecting and sealing pipe ends by screwing the external thread to the internal thread
TAP: BSPT 3/4″ X 14 TAPER HAND TAP ETS
SKU:
TAP3335030
* Manufactured by Somta SA
* British Standard Pipe Taper = BSPT
* These BSPT Taps are made from quality HSS-M2 for durability and long service life
* Whitworth vee form with 55 degrees
* Taper is 1 to 16
* Every 16.0mm increase in length the diameter increases by 1.0mm
* Widely used for connecting and sealing pipe ends by screwing the external thread to the internal thread
TAP; BSPT 3/4″ X 14 BOTTOM HAND TAP
SKU:
TAP3335032
* Manufactured by Somta SA
* British Standard Pipe Taper = BSPT
* These BSPT Taps are made from quality HSS-M2 for durability and long service life
* Whitworth vee form with 55 degrees
* Taper is 1 to 16
* Every 16.0mm increase in length the diameter increases by 1.0mm
* Widely used for connecting and sealing pipe ends by screwing the external thread to the internal thread
TAP: BSPT 7/8″ X 14 BOTTOM HAND TAP
SKU:
TAP3335034
* Manufactured by Somta SA
* British Standard Pipe Taper = BSPT
* These BSPT Taps are made from quality HSS-M2 for durability and long service life
* Whitworth vee form with 55 degrees
* Taper is 1 to 16
* Every 16.0mm increase in length the diameter increases by 1.0mm
* Widely used for connecting and sealing pipe ends by screwing the external thread to the internal thread
TAP: BSPT 1″ X 11 INTER HAND TAP (SOMTA)
SKU:
TAP3335036
* Manufactured by Somta SA
* British Standard Pipe Taper = BSPT
* These BSPT Taps are made from quality HSS-M2 for durability and long service life
* Whitworth vee form with 55 degrees
* Taper is 1 to 16
* Every 16.0mm increase in length the diameter increases by 1.0mm
* Widely used for connecting and sealing pipe ends by screwing the external thread to the internal thread
TAP: BSPT 2″ X 11 BOTTOM (SOMTA) HAND TAP
SKU:
TAP3335047
* Manufactured by Somta SA
* British Standard Pipe Taper = BSPT
* These BSPT Taps are made from quality HSS-M2 for durability and long service life
* Whitworth vee form with 55 degrees
* Taper is 1 to 16
* Every 16.0mm increase in length the diameter increases by 1.0mm
* Widely used for connecting and sealing pipe ends by screwing the external thread to the internal thread